VCB06-EN-2-B-00 load control valve
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Partnumber:
820158929
Package size:
0 pcs
Min. order quantity is:
1 pcs
Brand Name
Danfoss
Cavity
NCS06/3
Contamination level max.
20/18/14 - ISO 4406
Flow rate nominal LMin
60 lpm
Model code
VCB06-EN-2-B-00
Oil viscocity recommended
12 - 54 cSt
Pilot ratio
4,1:1
Pressure max.
350 bar
Pressure setting max.
210 bar
Pressure setting min.
70 bar
Torque tightening
44 - 50 Nm
Package size
0 pcs
Barcode
5704334322368
Gross weight
0,20 Kg
Net weight
0,20 Kg
Country of origin
Intrastat code
84812010
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Copyright © 2025 HydraSpecma