COUNTERBALANCE VALVE CP441-1-B-0-E-A-XXX-10.0-015
CP441-1, Hydraulic Vent Valve
Operation
This 3-ported, externally piloted unit is a 12-size cartridge style, low leakage counterbalance valve with hydraulic vent. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally blocking flow from port 1 to port 2. Reverse flow is blocked until pilot pressure is applied at port 3. When the load pressure at port 1 rises above the pressure setting, the integral relief valve is activated, and pressure is relieved from port 1 to port 2.
Applications
Single counterbalance valves are normally used when the load is unidirectional, such as aerial lifts, cranes, or winches. In load holding applications, they can be used as hose-break valves when installed near or within an actuator. Dual valves can be used for controlling loads bi-directionally in motor applications, or for cylinders going over center.
Partnumber:
131392000
Package size:
0 pcs
Min. order quantity is:
1 pcs
Brand Name
Danfoss
Cavity
CP12-3S
Contamination level max.
20/18/14 - ISO 4406
Flow rate nominal LMin
115 lpm
Model code
CP441-1-B-0-E-A-XXX-10.0-015
Oil viscocity recommended
12 - 54 cSt
Pilot ratio
10:1
Pressure max.
350 bar
Pressure setting max.
345 bar
Pressure setting min.
69 bar
Torque tightening
68 - 75 Nm
Package size
0 pcs
Barcode
5704334370437
Gross weight
0,31 Kg
Net weight
0,31 Kg
Country of origin
Intrastat code
84812010
CP441-1, Hydraulic Vent Valve
Operation
This 3-ported, externally piloted unit is a 12-size cartridge style, low leakage counterbalance valve with hydraulic vent. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally blocking flow from port 1 to port 2. Reverse flow is blocked until pilot pressure is applied at port 3. When the load pressure at port 1 rises above the pressure setting, the integral relief valve is activated, and pressure is relieved from port 1 to port 2.
Applications
Single counterbalance valves are normally used when the load is unidirectional, such as aerial lifts, cranes, or winches. In load holding applications, they can be used as hose-break valves when installed near or within an actuator. Dual valves can be used for controlling loads bi-directionally in motor applications, or for cylinders going over center.
Copyright © 2025 HydraSpecma